SP80: an 80 knot sailboat demands high performance

0

Fischer Connectors’ solutions support the transmission of sensor data for the wind-powered SP80 boat which is about to reach the phenomenal speed of 80 knots, which, if achieved, will break the world sailing speed record of long time of 65.45 knots.


During the development of its boat, which is now approaching its final design phase, the SP80 team chose Fischer Connectors for the data transmission solutions interconnecting the various sensors that will equip the boat and its pilot to beat the world speed record. sailing.

The technical challenge is to sail at a speed of 80 knots (148.16 km/h), propelled only by the wind. That’s 14.55 knots faster than the record of 65.45 knots (121.21 km/h) set in 2012.

The carbon fiber SP80 boat looks like a Formula 1 car paired with a specially designed fighter jet to glide over water, featuring a super-ventilated triangular hydrofoil and towed by a huge kite wing.

“Several projects are in the running to break the world sailing speed record,” said Mayeul van den Broek, CEO of the SP80 startup based in Renens near Lausanne, Switzerland, and created in 2019 by a team of engineers. and students from the Ecole Polytechnique Fédérale de Lausanne (EPFL). “This technological adventure is exciting because we are faced with extremely demanding physical laws. This is why our international team of almost 50 people, some of whom are finalizing the innovative design of our boat which is built in the Persico Marine shipyard in Italy, is keen to obtain the best in terms of performance. and reliability of data transmission. These technical requirements are crucial for interconnecting the various sensors with which our boat and its pilot will be equipped during the launches and the boat improvement campaigns planned for the end of the year, and the record event planned for the year. next. ”

3D rendering of the SP80 sailing on water. (photo courtesy of SP80)

The data collected by the multiple sensors and recorders monitoring the structure of the boat and the performance of the pilot will be transferred via the connectors, the associated cables and the electronic solutions of the Swiss Fischer Connectors. shatter ambition,” van den Broek said. “The innovations we put in place to improve the aerodynamics of our boat above water and minimize the friction of its hull and foil underwater must be monitored during the development phase of the boat as well as during the speed run itself. To ensure the efficient transfer of this surveillance data, we need a solution provider that not only has expertise in signal integrity and data transmission and management, but also a holistic approach to electronic systems to to provide the required end-to-end connectivity solutions. for our detection system.

During the design phase, sensors are used to improve and control the robustness of the high-performance materials (carbon, titanium, stainless steel) of the boat’s structure. Thanks to the super-ventilated foil design, stability is optimized and the impact of cavitation – a phenomenon in which water begins to boil around the foils at extreme speeds, slowing the boat down – is avoided. During the sprint, data is collected from the various electronic modules and control sensors directly integrated into the boat, and from monitoring sensor communications between the pilot and the technical crew ashore, including biometric data transferred via sensors worn on the pilot’s body such as vital and safety parameters.

“The SP80 project is exciting and inspiring,” says Jonathan Brossard, CEO of Fischer Connectors, “as it combines innovation and performance to push the limits of physical laws through unique solutions and bold concepts. A member of the SP80 R&D team is part of our own R&D center, which makes the exchange of expertise all the more efficient and easy. We look forward to the technological breakthroughs that the SP80 team is working on and that Fischer Connectors is proud to support.

The final design of the boat for the record will be unveiled to the public in spring 2022. The launch of the boat will take place at the end of 2022, while the first trials are scheduled in the South of France for spring or autumn 2022 2023 – the two times of the year that offer the best weather conditions for sailing.


Under construction at Persico Marine shipyard: Main hull mold Photo courtesy of SP80

Share.

Comments are closed.